Osciloscop Digital portabil DSO150 cu sonde ecran colir
5

Osciloscop Digital portabil DSO150 cu sonde ecran colir

Osciloscop Digital portabil DSO150 bazat pe processor ARM Cortex-M3 cu ecran color de 2.4-inch TFT pret 165ron cu sonde simple crocodil pret 180ron osciloscop + alimentator 9v lab220v pret 170 ron include si adaptor baterie 9v It's easy and reliable for circuit operation. It can display waveform parameters, such as frequency, period, pulse width, duty ratio, MAX. MIN.,AVG.,Peak-Peak,virtual values. poate fi folosit pt sonda lambda la masini motociclete etc.. in electronica vizualizare semnale PWM Features: Adopt ARM Cortex-M3 processor (STM32F103C8), and include a 2.4-inch color TFT display screen. Used for secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers. Come with instructions, easy to install and operate. With Auto, Normal, Single trigger modes, easy to capture the moment waveform. Available rising or falling edge trigger. Observable previous waveform before trigger(negative delay). Can freeze waveform display at any time(HOLD function). With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX. MIN. AVG. Peak-Peak virtual values. Waveform storage function: will not lose the waveform after power off. Short-circuit and open-circuit detection: can help the user find out the soldering error. TFT controller recognition function. Specifications: Maximum Real-time Sampling Rate: 1MSa s Analog Bandwidth: 0-200KHz Sensitivity Range: 5mV div-20mV div Maximum Input Voltage: 50Vpk (1X probe) Input Impedance: 1M ohms ,20pF Accuracy: 12 Bits Record Length: 1024 points Coupling Modes: DC , AC , GND Time Base Range: 500s per Div - 10us Div Trigger Modes: Auto, Normal, and Single Trigger Position: Center of Buffer Supply Voltage: DC 9V(8-10V) Current Consumption: 120mA 9V Main Board Size: 94 * 65mm x 3.7 * 2.56in Analog Board Size: 65 * 47mm x 2.56 * 1.85in Screen Size: 52 * 40mm x 2 * 1.57in Package Size: 14.5 * 10 * 3.7cm x 5. in Package Weight: 179g

Timisoara, Timis

servo motor MG996R  MG995 cu roti de metal cuplu15kg/cm navomodele barcute plasat momeala
2

servo motor MG996R MG995 cu roti de metal cuplu15kg/cm navomodele barcute plasat momeala

MG996R MG996 Metal Gear RC Servo High Speed & Torque RC CAR 1/8 Rotatie 270grade specificatii: Dimension: 40mm x 19mm x 43mm Operating Speed: 0.17sec / 60 degrees (4.8V no load) Operating Speed: 0.13sec / 60 degrees (6.0V no load) Stall Torque : 13 kg-cm (180.5 oz-in) at 4.8V Stall Torque : 15 kg-cm (208.3 oz-in) at 6V Temperature Range: -30 + 60 degree Operation Voltage: 4.8 - 7.2Volts Gear Type: All Metal Gears Connector Wire: Heavy Duty, 11.81" (300mm) greutate: 69g

Timisoara, Timis

modul Bluetooth 5 Audio stereo mp3 hands free card USB radio telecomanda
5

modul Bluetooth 5 Audio stereo mp3 hands free card USB radio telecomanda

Modele la 12v sau 5v Modelul la 5v include si microfon hands free dimensiuni: 83*28MM functii: Bluetooth / Dual decoding MP3, WMA, WAV format music / read USB disk / read SD card / radio FM / external audio input LINE IN (AUX) / infrared remote control / power off memory / power supply 5V or 12V First, the main function: 1, dual decoding supports MP3/WMA/WAV format music; 2, support Bluetooth 5 function; 3, with digital display; 4, support MMC/SD/MMA and other cards, support USB interface (U disk); 5, power and memory function 24C02; 6, support 5-10 meters distance infrared remote control operation; 7, support for external audio input LINE IN (AUX); 8, support for FM radio, receive the band (87.5MHZ-108.0MHZ); 9, button: four-button multi-directional control, MODE / on a song / play / pause / next song; Second, the key operation details: 1, the last song button (volume decreases): In the MP3 state, short press for the previous song, long press for the volume to reduce; in the FM state, short press for upward adjustment of a station number; under the Bluetooth function, short press Bluetooth on a song, long press for volume reduction. 2. Play/Pause: Short press to play/pause in MP3 state; Short press to play/pause in FM state; Long press to automatically collect and store in Taiwan; Short press to play/pause under Bluetooth function. 3, the next song button (volume increase): In the MP3 state, press the short for the next song, long press for the volume increase; short press in the FM state for the downward adjustment of a station number; short press in the Bluetooth function as The next song in Bluetooth, long press to increase the volume. 4, MODE button: switch between USB/SD/FM/AUX/Bluetooth functions in turn Nota: bateria nu e inclusa ------------model gri cu intrerupator si conector miniusb---> NOTE: MINI USB-IN can not be used directly if not connected to the battery.Must connect the battery at first, then use MINI USB IN.Otherwise it may damage the decoder board. 1.Power Supply Voltage:3.6-5V;3W stereo power amplifier output (BTL output,no common GND,cannot connect with other amplifiers for use) 2.Multi-function:bluetooth receive;hands-free call;fast forward/fast backward;insertation MP3 play;AUX function;radio 3.Self-equipped with bluetooth audio receive module;after cellphone and bluetooth module has matched successfully,cellphone can play MP3 or bluetooth can send loseless APE file to bluetooth receive module to play;support hands-free call;support playing MP3 document in U-disk or SD card;support radio playing 75mmX27mmX34.5mm Bluetooth Function Operation Method 1.Press "MODE" key to switch state to "BLUE" 2.Open audio device with bluetooth function,search "ZTV-CT02EA" and connects with it 3.Volume can be controlled by external connection sound source device;or long press "PREV" and "NEXT" to adjust vlume 4.When there is call in,short press "Play/Pause"is for answering the phone and long press is for rejecting

Timisoara, Timis

Joystick noi pt automatizari Arduino esp8266 raspberryPI tel.
3

Joystick noi pt automatizari Arduino esp8266 raspberryPI tel.

miscare stanga-dreapta, sus-jos si functie click -momentary switch toate sunt noi sigilate in pungi electrostatice for PS2 joystick joysticks standard interface module electronic building blocks and 2.54mm pin interface leads. Phillips is a two-way rocker 10K resistor, with the joystick in a different direction, tap the resistance vary. This module uses a 5V supply, the original state X, Y readout voltage of 2.5V or so, when pressed with the direction of the arrow, the readout voltage values with increasing, up to 5V; press the arrow in the opposite direction, the readout voltage reduction , a minimum of 0V. Specification: Net Weight:11g Weight:21g Color:Black Size:34.5*26*38mm

Timisoara, Timis